Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER Uživatelský manuál stáhnout pdf (Strana 48)

E 1 = Display Blank, 2 = External Gate*

F 1 = Display Item #2, 2 = Display Item #3

With 1 and 2 at 5V or open, Display Item #1.

-------------------------------------------------------------------

* 1 & 2 both at 0V = Meter Reset (can restore

totals).

** 1 & 2 both at 0V for selections 5, 7, 8, D =

Function Reset* (erases all totals).

__0000 Display mode 0 Normal, overload to exponential format

1 Normal, overload to 999999

Normally select 1, required for Preset function. See

dual signal conditioner for other available modes.

__0000 Counter type 0 Basic counter (use for quadrature total)

1 Extended counter

__0000 Square root 0 Set to 0.

ConFiG

Configura-

tion

__0000 V-to-F batch 0 Set to 0.

____01 Response to

PEAK

pushbutton

0 Peak

1 Valley

2 Peak (1

push), Valley (2

push)

dSPyno

Display

____01 Item # 1 Set to 1 (ignored for Quadrature Total).

PULSES

Zero index

pulses*

_00000 _00000 _00000

_00000 _00000

Select digit to flash.

Select 0 thru 9 for flashing digit to set zero index

pulses. This should pulses per revolution x edges

per pulse (1, 2 or 4) x scale factor.

GAtE_t

Gate time*

_000.00 _000.00 _000.00

_000.00 _000.00

Select digit to flash.

Select 0 thru 9 for flashing digit to set the display

update rate from 10 ms to 199.99 s.

dEC.Pt1

Decimal pt1

11111

Decimal point flashes.

11111 11

1111 111

111 1111

11 11111

1 111111

Press to shift decimal point.

Scale and Offset scaling method if selected under SEtuP

SCALE1

Scale

Factor 1

0.00000 0.00000 0.00000

Select the digit to flash

for the Scale Value, then

press one more time

for the Scale Multiplier.

Select -9 thru 9 for flashing first digit and 0 thru 9 for

other flashing digits. This will set the Scale Value*

from -9.99999 to 9.99999 with a fixed decimal point.

Then press to select a value from 0.00001 to

100000 in decade steps for the Scale Multiplier.

Scale Factor = Scale Value x Scale Multiplier.

OFFSt1.

Offset 1

000000 000000 000000

Select digit to flash.

Select -9 thru 9 for flashing first digit and 0 thru 9 for

other flashing digits. dEC.Pt1 is used for decimal

point.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

Komentáře k této Příručce

Žádné komentáře

Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER Uživatelský manuál Strana 48

Komentáře k této Příručce

Související produkty a manuály pro Hardware Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER