Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER Uživatelský manuál stáhnout pdf (Strana 28)

Press

Press Digit Select

Key

Press Value Select

Key

bAtCH

(continued)

_00000

Definition of Item #2

0 Make Item #2 the Grand Total of all batches.

1 Make Item #2 the Total Number of batches.

_00000

Action after Meter Reset

0 Display “rEAdy.” RESET key starts batching.

1 Start batching upon Meter Reset.

_00000

Filter type

0 Adaptive moving average filter. Restarts filter for

high actual changes in signal.

1 Conventional moving average filter without reset.

_00000

Peak & Valley filtering

0 Peak* or Valley* value from unfiltered signal.

1 Peak* or Valley* value from filtered signal.

_00000

Display filtering

0 Display value of unfiltered signal.

1 Display value of filtered signal.

_00000

Adaptive filter threshold

0 Set adaptive filter for normal noise.

1 Set adaptive filter for presence of high transients.

FiLtEr

Filtering

_00000

Filter time constant

0 No filter 1 0.1 sec 2 0.2 sec 3 0.4 sec

4 0.8 sec 5 1.6 sec 6 3.2 sec 7 6.4 sec

.SLOPE

Triggering

____00

Trigger slope, Channel A

0 Positive slope

1 Negative slope

____00

Trigger slope, Channel B

0 Positive slope

1 Negative slope

dEC.Pt1

Decimal pt1

11111

Decimal point flashes.

11111 11

1111 111

111 1111

11 11111

1 111111

Press to shift the decimal point.

dEC.Pt22

Decimal pt2

22222

Decimal point flashes.

22222 22

2222 222

222 2222

22 22222

2 222222

Press to shift the decimal point.

Scale and Offset scaling method if selected under SEtuP

SCALE1

Scale

Factor 1

0.00000 0.00000 0.00000

Select digit to flash for

Scale Value. When right

digit flashes, press one

more time for the Scale

Multiplier.

Select -9 thru 9 for flashing first digit and 0 thru 9 for

other flashing digits. This will set the Scale Value*

from -9.99999 to 9.99999 with a fixed decimal point.

Then press to select a value from 0.00001 to

100000 in decade steps for the Scale Multiplier.

Scale Factor = Scale Value x Scale Multiplier.

OFFSt1.

Offset 1

000000 000000 000000

Select digit to flash.

Select -9 thru 9 for flashing first digit and 0 thru 9 for

other flashing digits. Use dEC.Pt1 to set the decimal

point.

SCALE2 Scale Factor 2. Same setup process as for Scale Factor 1.

OFFSt2. Offset 2. Same setup process as for Offset 1.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 79 80

Komentáře k této Příručce

Žádné komentáře

Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER Uživatelský manuál Strana 28

Komentáře k této Příručce

Související produkty a manuály pro Hardware Laurel-electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER