Laurel-electronics LAUREATE SERIES 2 SERIAL INPUT METER & REMOTE Uživatelský manuál stáhnout pdf (Strana 9)

8. FRONT PANEL SETUP KEYS

Counter Front Panel

There are four front panel keys, which change function for the Run Mode and Menu Mode,

effectively becoming eight keys. The keys are labeled with alphanumeric captions (MENU,

PEAK, RESET, ALARMS) for the Run Mode and with symbols ( right arrow, right

triangle, up triangle, left arrow) for the Menu Mode.

FRONT PANEL LOCKOUT

The Menu Mode will not work with most meters shipped from the factory, since all menu

items have been disabled in software and a lockout jumper is in place. This jumper needs to

be removed for the Menu Mode to work, and values under _Loc 1 through _Loc 4 need to

be set to "0" via the front panel for these menu items to be available. See Section 9. The

paragraphs below assume that all lockout features have been removed.

MENU MODE KEY ACTION

In the Menu Mode, pressing a key momentarily advances to the next item. Holding down

the key advances through multiple menu items for fast menu navigation.

KEYS IN RUN MODE

MENU Key. Pressing MENU from the Run Mode enters the Menu Mode. Pressing

MENU repeatedly will step the meter through the various menu items (if these have not

been locked out) and then back to the Run Mode.

RESET Key. Pressing RESET with ALARMS resets latched alarms. Pressing RESET

with MENU performs a meter reset (same as power on).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Žádné komentáře

Laurel-electronics LAUREATE SERIES 2 SERIAL INPUT METER & REMOTE Uživatelský manuál Strana 9